DTS has a full line of standard PIBs for all major tester platforms. Custom PIB designs can accommodate any test head, prober and manipulator configuration, including probe card changers, overhead direct dock setups and cable interfaces. DTS wafer test loadboards are compatible with a variety of pogo pin interface towers. All PIBs are constructed with impedance control, precision matched line lengths, full power and ground planes and both analog and digital resources to provide high quality signal integrity directly to the device.
Service provided in partnership with DTS
Design
- Support Across All Design Software Platforms
- Template & BOM Creation
- Component / Symbol Creation (Librarian Services)
- Schematic Capture
- Component Placement
- Physical Routing
- Post Processing
- Design QC Services (DFM, DRC, Specification Validation)
- Fab Preparation
- Pre-Fab Stack Up
Fabrication
- Complete Turn-Key Services
- Service Across All Board Complexities
- U.S. and Asia Based Manufacturing
- In House Pre-Fab CAD / CAM and QC Processes
- Full Turn-Key Services
- Typical Cycle Times: 7-10 days (Expedite Options Available)
Assembly
- Component Sourcing and Procurement
- Both Hand & Automated Assembly
- Full Turn-Key Services
- Application Support
- Assembly Metrology Tools at All 3rd Party Assembly Partners
- Automated Pick-and-Place and Reflow Available
- AOI & Flying Probe Test Available
Turn Key
- Support Across All Design Software Platforms
- Template & BOM Creation
- Probe Heads(Cantilever, Vertical, MEMS)
- WLCSP Contactors
- Sockets – Production and Hand Test
- Strip Test Contactors
- Custom Cable Solutions
- Motherboards and Interfaces
- Stiffeners and Mechanical Hardware
DTS offers both generic and custom PCBs blanks for probe cards. Probe card PCBs are available for all tester platforms and can be configured for any vertical technology, epoxy cantilever and legacy blade cards. DTS probe card blanks are made to precise specifications required for all probing technologies and are available in high speed and high temperature materials. All probe card PCBs employ a balanced layering construction to maintain tight flatness specifications and minimize warping, allowing good probe planarity. Gold plating on all surface metals facilitates easy soldering and minimizes probe resistance. DTS is continually adding new probe card blanks to its library!
Service provided in partnership with DTS
Design
- Support Across All Design Software Platforms
- Template & BOM Creation
- Component / Symbol Creation (Librarian Services)
- Schematic Capture
- Component Placement
- Physical Routing
- Post Processing
- Design QC Services (DFM, DRC, Specification Validation)
- Fab Preparation
- Pre-Fab Stack Up
Fabrication
- Complete Turn-Key Services
- Service Across All Board Complexities
- U.S. and Asia Based Manufacturing
- In House Pre-Fab CAD / CAM and QC Processes
- Full Turn-Key Services
- Typical Cycle Times: 7-10 days (Expedite Options Available)
Assembly
- Component Sourcing and Procurement
- Both Hand & Automated Assembly
- Full Turn-Key Services
- Application Support
- Assembly Metrology Tools at All 3rd Party Assembly Partners
- Automated Pick-and-Place and Reflow Available
- AOI & Flying Probe Test Available
Turn Key
- Support Across All Design Software Platforms
- Template & BOM Creation
- Probe Heads(Cantilever, Vertical, MEMS)
- WLCSP Contactors
- Sockets – Production and Hand Test
- Strip Test Contactors
- Custom Cable Solutions
- Motherboards and Interfaces
- Stiffeners and Mechanical Hardware
DTS Package Test (DIB) loadboards are designed to specific devices and configured for both hand test and fully automated handler applications. DTS loadboards incorporate any brand of socket or contactor and can be configured for multi-site testing. Designs incorporate all necessary components, connectors, mechanical hardware and stiffeners to provide a complete plug-n-play solution. DTS has a vast database of tester and handler information which allow designs to be started and completed quickly without burdening the customer to supply excessive information. DTS designers are experienced in all device types, including digital, analog, mixed signal and RF devices.
Service provided in partnership with DTS
Design
- Support Across All Design Software Platforms
- Template & BOM Creation
- Component / Symbol Creation (Librarian Services)
- Schematic Capture
- Component Placement
- Physical Routing
- Post Processing
- Design QC Services (DFM, DRC, Specification Validation)
- Fab Preparation
- Pre-Fab Stack Up
Fabrication
- Complete Turn-Key Services
- Service Across All Board Complexities
- U.S. and Asia Based Manufacturing
- In House Pre-Fab CAD / CAM and QC Processes
- Full Turn-Key Services
- Typical Cycle Times: 7-10 days (Expedite Options Available)
Assembly
- Component Sourcing and Procurement
- Both Hand & Automated Assembly
- Full Turn-Key Services
- Application Support
- Assembly Metrology Tools at All 3rd Party Assembly Partners
- Automated Pick-and-Place and Reflow Available
- AOI & Flying Probe Test Available
Turn Key
- Support Across All Design Software Platforms
- Template & BOM Creation
- Probe Heads(Cantilever, Vertical, MEMS)
- WLCSP Contactors
- Sockets – Production and Hand Test
- Strip Test Contactors
- Custom Cable Solutions
- Motherboards and Interfaces
- Stiffeners and Mechanical Hardware
Interested in Enhancing Your Business ?
Contact us today to learn more about how our Service Solutions can elevate your Value Proposition and Productivity!
Click Here to Contact Us