Quorum Technologies

E4800 Recirculating Heater/Chillers

The E4800 Series of Recirculating Heater/Chiller is recommended for a wide range of open and closed-loop temperature control applications. The E4860 is the solution for use with the E3100 and K850WM critical point dryers. Features Environmental considerations Increasing pressures on natural resources have resulted in many countries restricting the use of water run to waste …

E4800 Recirculating Heater/Chillers Read More »

K850WM Large Chamber Critical Point Dryer

The K850WM is a compact, bench-top instrument designed to critical point dry a complete 6″/150 mm wafer. A convenient wafer holder allows rapid transfer and ensures that pre-drying does not occur. K850WM Large Chamber Critical Point Dryer The K850WM has built-in heating and water cooling using the E4860 Recirculating Heater/Chiller. This combination will give temperature control of +5°C …

K850WM Large Chamber Critical Point Dryer Read More »

E3100 Critical Point Dryer

The E3100 large chamber critical point dryer has been an industry standard for over 35 years and is used in numerous scanning electron microscopy (SEM) laboratories around the world. Primarily used for critical drying of biological and geological specimens, the E3100 can also used for the controlled drying MEMs,  aerogels and hydrogels. Features E3100 Critical Point Dryer The E3100 …

E3100 Critical Point Dryer Read More »

K850 Critical Point Dryer

The K850 combines versatility and ease of operation. Built-in thermo-electric heating and adiabatic cooling allow precise temperature control. The vertical pressure chamber (32 mm diameter x 47 mm) has a side viewing port, which gives a clear view of the liquid meniscus during filling. A magnetic stirrer ensures optimal mixing and exchange of process fluids. …

K850 Critical Point Dryer Read More »

MiniQ GD

Designed with simplicity in mind, the easy-to-use MiniQ GD allows for surface modification of TEM grids. Resulting in the clear imaging of macromolecules. Features

GloQube® Plus Glow Discharge System for TEM Grids and surface modification

The GloQube® Plus is a cost-effective, compact and easy to use glow discharge system, designed to fulfil the needs of laboratories with TEM. The primary application of the GloQube® Plus is to modify the surface of TEM grids in a way that it meets requirements for successful imaging of a variety of macromolecules. Integrated into …

GloQube® Plus Glow Discharge System for TEM Grids and surface modification Read More »

Q300T D Plus – dual target sequential sputtering for specimens up to 150 mm diameter

Suitable for multi-layer sequential sputtering of two materials, the Q300T D Plus has two independent sputtering heads, which allows sequential sputtering of two metals without the need to break vacuum. The system is fully automated with user defined recipes controlling the pumping sequence, time, number of sputter cycles, and the current used during the process. …

Q300T D Plus – dual target sequential sputtering for specimens up to 150 mm diameter Read More »

Q300T T Plus – triple target sputter coater for specimens up to 200mm diameter

The Q300T T Plus is a large chamber, turbo-pumped coating system, ideally suited for sputtering a single large diameter specimen up to 8″/200mm or multiple smaller specimens over a similar diameter. Ideal for thin-film applications and SEM/FE-SEM. It is fitted with three sputtering heads to ensure even deposition of individual large specimens or multiple specimens. NB: …

Q300T T Plus – triple target sputter coater for specimens up to 200mm diameter Read More »

Q150 GB Turbo-Pumped Sputter Coater / Carbon Coater for Glove Box

The Q150 GB is a modular glove box version of the highly successful Q150T ES Plus bench top turbomolecular-pumped coating system – suitable for SEM, TEM and many thin-film applications. The Q150 GB comes as standard with sputtering and carbon rod evaporation inserts and a rotating specimen stage. Options include metal evaporation, glow discharge, film …

Q150 GB Turbo-Pumped Sputter Coater / Carbon Coater for Glove Box Read More »

Q150R Plus – Rotary Pumped Coater

The Q150R Plus is suitable for use with Tungsten/LaB6 SEM and Benchtop SEM. Recommended for magnifications: Carbon cord coating for elemental analysis using the Q150R E & ES Plus. Features The Q150R Plus is available in three configurations: Recommended applications for Q150R Plus: These products are for Research Use Only.  New user interface has been thoroughly updated: …

Q150R Plus – Rotary Pumped Coater Read More »

Scroll to Top